Note: Available functions and displayed values may vary depending on the vehicle model, engine and equipment.
Key Highlights
Daylight-readable High-resolution display that remains clearly readable even in direct sunlight.
Multi-language The shop and device can be switched to the desired language at any time.
Selectable units Choose between °C/°F, bar/psi, Lambda/AFR and many other units.
Variable brightness Automatic adjustment using the vehicle’s ambient lighting or manual control.
Live Data: Temperatures and Engine Parameters
All relevant vehicle values at a glance – for daily driving, workshop checks and spirited use.
- Coolant temperature
- Oil temperature
- Oil temperature from the sump
- Intake air temperature (IAT)
- Exhaust gas temperature (EGT)
- Transmission temperature
- Rear axle temperature
- Oil pressure
- Lambda
- Low-pressure fuel
- Rail pressure
- Wastegate (WGDC)
- Ignition timing and angle
- DPF differential pressure
- Pre-DPF pressure
- Ash mass
- Soot mass
- Regeneration status
- Injector quantity correction
- Oil level
- Fuel level – total, left and right
- and many more values
Performance Timers with 40 Hz Resolution
Accurate acceleration and distance measurements – with optional GPS speed calibration for maximum precision.
- 0–100 km/h (0–60 mph)
- 100–200 km/h (60–120 mph)
- Freely configurable from-to measurement
- 100–0 km/h (60–0 mph)
- 1/8, 1/4 and 1/2 mile
- Shift speed display
- Elevation difference, where GPS or navigation is available
- Last three runs and top-three best results
Diagnostics and Fault Memory
- Read and clear the fault memory directly from the display
- Display the fault code and the corresponding fault text
Custom Pages and Live Graph
- Up to eight freely configurable values per page
- Four values displayed as a live scrolling graph
- Stored and resettable peak values
- Adjustable colours for values and bars
Warnings You Cannot Miss
Critical conditions trigger an immediate alert – either as an icon or as a large, highly visible warning screen.
Up to 3 linked values per limit Up to 9 independent limits simultaneously
Extensions and Additional Features
- External sensor inputs, for example for oil pressure or additional oil and differential temperatures
- External shift light with up to 16 WS2812B LEDs; colours and number of LEDs are freely configurable
- Gauge sweep to user-defined values when the ignition is switched on
Vehicle Functions – Depending on Version
- Control of the factory-fitted exhaust flap – FULL only, not included in Street-Legal
- Optional flap control using steering-wheel buttons or radio favourites with a freely selectable number combination (1)
- Disable sound tuning or burbles, including in Sport and Sport+ modes
- Disable Active Sound Design
- Delete-R to suppress the “catalyst efficiency below threshold” fault
Software and Updates
- Street-Legal and FULL are software versions – customers can switch or upgrade at any time
- Easy updates using a USB flash drive – fast and without a PC, from software version 1.53 and bootloader 0.9
- Custom boot image – change the personal startup logo at any time using USB
Modules and Activations
- CAN Extension: module activation after purchase in the shop (1)
- Logger: module activation after purchase in the shop (2)
- USB logging: record all relevant values to a USB flash drive for later analysis (2)
(1) CAN Extension required | (2) Logger module required