Note: features/values depend on model and engine.
Highlights
- High-resolution daylight-readable display – clear even in direct sunlight
- Multi-language – shop & device can be switched anytime
- Selectable units: °C/°F, bar/psi, Lambda/AFR and more
- Brightness: automatic (vehicle ambient light) or manual control
Live data: temperatures & engine parameters
All key values at a glance – for daily driving, workshop checks and spirited use.
- Coolant temperature
- Oil temperature
- Oil temperature (sump)
- Intake air temperature (IAT)
- Exhaust gas temperature (EGT)
- Transmission temperature
- Rear axle temperature
- Oil pressure
- Lambda
- Low-pressure fuel
- Rail pressure
- Wastegate (WGDC)
- Ignition timing/angle
- DPF differential pressure
- Pre-DPF pressure
- Ash mass
- Soot mass
- Regeneration status
- Injector quantity correction
- Oil level
- Fuel level (total, left, right)
- and many more...
Performance timers (40 Hz resolution)
Accurate acceleration and distance measurements – optional GPS speed calibration for maximum precision.
- 0–100 km/h (0–60 mph)
- 100–200 km/h (60–120 mph)
- Custom from–to
- 100–0 km/h (60–0 mph)
- 1/8 mile, 1/4 mile, 1/2 mile
- Shift speed display
- Elevation delta (if GPS/navigation is available)
- Last 3 runs + Top-3 best results
Diagnostics: fault memory
- Read & clear fault memory
- Displays fault code and fault text directly on the screen
Custom pages, live graph & peak values
- Custom pages: up to 8 values per page, freely configurable
- Live graph: 4 values as a live scrolling chart
- Peak values are stored and can be reset
- Adjustable colors for values/bars
Limits: warnings you can’t miss
Immediate alerts when values get critical – as an icon or a full, highly visible warning screen.
- Up to 3 linked values per limit
- Up to 9 limits running in parallel, independently
Extensions & features
- External sensor inputs (e.g. oil pressure, extra temps like oil/differential)
- External shift light: up to 16 WS2812B LEDs (colors/zones configurable)
- Gauge sweep: needles move to user-defined values at ignition ON
Vehicle functions (version dependent)
- OEM exhaust flap control (FULL only, not included in Street-Legal)
- Optional flap control via steering wheel buttons or radio favorites (custom code) (1)
- Disable soundtuning (burbles) (also in Sport+)
- Disable Active Sound Design
- Delete-R (suppress catalyst efficiency fault)
Software & updates
- Street-Legal & FULL are software versions – customers can upgrade/switch anytime
- Easy USB flash drive updates – fast & simple, no workshop needed (from Version 1.53 and Bootloader 0.9)
- Custom boot image – change your startup logo anytime via USB
Modules / activations
- CAN Extension: unlock after shop purchase (1)
- Logger: unlock after shop purchase (2)
- USB logging: log relevant data to a USB stick, optional auto-logging (2)
(1) CAN Extension required | (2) Logger module required