Updates
Notice:
If the download does not start (e.g. Google Chrome) - right-click on the download link and select "Save link as...".
Other browsers may report a warning, of course these are not dangerous files.
Do not copy the files into a folder with special characters in their names! So it doesn't work on the desktop if the username contains a special character.
E.g. ÓóÉé etc.
Otherwise an error message appears when opening the update file.
The updates usually take 12-15 minutes.
"STREET LEGAL" in the file name means that no exhaust flap control is possible in this software.
Only the latest update has to be installed, even if there are several versions between the current and the new version.
Check that Bootloader Version 0.5 is installed !!!
Updates:
16.11.2024
Version 1.38 Beta2
V1.38 Beta2
- Fix Swipe up/down direction at temperature overview
- Test M57 TU2 (EcuID 5002064) Exhaust temperature not changing at full throttle
- Fix N54 / N53 with same ECU but different values
07.11.2024
Version 1.37
V1.37
- Gauge sweep enter value by KeyPad (press on text/value)
- Fix: change calculation of auto speed offset (if gps is available)
- Fix Can-Bus Extension: blinker feedback when radio favorite buttons activated but not RES button
- Fix: Read/Save some values from/to EEPROM
- Beta test: graph custom (swipe in custom)
- Beta test: swipe down in temperature overview to go to custom page
10.10.2024
Version 1.36 -2 (Important Update!!!)
V1.36-2
- Fix: Initial read values/options ...
V1.36
- improvement E-Series communication
- add oil sump temperatur to custom page (where available)
- add option (settings - display - Data Options) to show oil sump temperature instead of default can-bus message
- fix freeze custom time measurement
- fix general freezes
- "Radio Favorites Buttons" module added. Switch the exhaust flap by touching the radio buttons (code freely selectable).
28.09.2024
Version 1.34
V1.34
- Improvement: Auto-Logging
26.09.2024
Version 1.33
V1.33
- Fix: Temperature overview. Rear-Diff-Temperature at wrong position when option "show diff temp at exhaust temp position" is active
Version 1.32
V1.32
- Fix: Possible freeze at boot
25.09.2024
Version 1.31
V1.31
- Fix: gearbox temperature visible only when available
- Fix (to be confirmed): E-Series gaugesweep after ignition on/off/on
- Logmodule: Fix: create an empty file before start logging
- Fix: E-Series Diesel bug from Version 1.00 (no DDE data)
- Faster exhaustflap switch after boot
- Add: Auto Logging - Settings - System - System-Settings (Automatically activate logging 3 seconds after display boot)
13.09.2024
Version 1.3
V1.3
- Fix Liter - Gallons at fuel-page
- Fix rear diff does not appear after boot (page needs to be changed)
- add modules activation button
- add logger module
18.08.2024
Version 1.0
V1.0
- Add Option for N54 "scaled TMAP sensor" when N20 TMAP sensor is installed and is scaled to run higher boost
- Add Option (Settings - System - System Settings) "Permanent communication with ECU" which will start the communication and control even the engine is not running (faster exhaust flap switch)
- Fix some translations (if you find more wrong translation, let me know)
- Fix B47 oil pressure (activate it at Settings - System - System-Settings)
- Test: M47 "Injector Mass Correction"
Version 0.49 (BETA9)
0.49 Beta 9
- Add Diff temperature to max values if available
- Fix: Color setup diff temperature blue plus not working
- Add Diff temperature for S63 (M5 & M6)
- Fix: Error Codes äÄüÜöÖ
- Fix: IAT Temperature color showing wrong
0.49 Beta 8
- Add Diff-Temp Option to M2 F87 N55
- If manual gearbox, diff-temperature will be shown at the position of gearbox temperature
0.49 Beta 7
- Fix Black Screen every boot at E- and G-Series Since 0.49 Beta 4 when "Boot last page" is activated
0.49 Beta 6
- Fix: Street mode activation feedback in instrument cluster still working even when street-mode is already active
- Fix: Set exhaust flap invisible when Street-Mode is activated by MFL and Exhaust Flap icons are visible at this moment
- Fix: Brightness % on Display Brightness Setup Page
- Test: Rear Diff temperature (F80 / F82)
- Add: Diff temperature color setup
- Add: If differential temperature is available the option "Show Temp Diff instead Exhaust" is available in Display Data Options Menu
0.49 Beta 4
- Fix: Disable Kombi Blinker when MFL for exhaust flap is pressed and Street Mode active
- Fix: Boot last Page
0.49 Beta 3
- Fix: Wrong calculation of some values
0.49 Beta 2
- Fix Timemeasurement Custom Freeze Display
- Add Brightness coming from car (orange) and display brightness (white) % on brightness setup page
- Fix Shifttime at time measurement page
- Add serial number at system-info page
0.49 Beta 1
- Fix max values - implausible values
- Change Speed Offset (only 100 kmh (60 mph) is needed) and in case GPS Speed is available there is only the Auto function possible
- Add B47 Oil pressure (to be tested)
- Add Limit Warning Page (When press on the Red Limit Page it change the option to small icon instead of complete page)
- Fix Limit Warning with third value
- Faster screen switch
- New Time measurements - complete rework
- E-Series N57 (ECU ID: 5719056) add Injector "Mengenkorrektur"
06.05.2024
Version 0.47
0.47
- Fix MHD Can-Bus FlexFuel (at fuel-info page)
- Fix N57 E-Series Lambda & Wastegate
- Change: external Analog "A1" can be oil pressure or boost pressure
- Fix: E-Series locked screen unlocked after ignition off/on
- Fix: Speed at temperature overview was wrong when mp/h selected
- Improvement: internal LCD control
- add external differential temperature sensor option (Temp Sensor 2) (available at custom page when activated)
- start - not fully implemented: differential temperature if OEM electronic differential is available
14.02.2024
Version 0.45
0.45
- Add: DPF Regeneration exhaust temperature in red as an option
- Soundtuning only visible where available
- For testing: Add Delete-R (no downpipe catalyst error - where available)
- Fix: Saving Limit Setting
- Fix: Soundtuning ON/OFF was inverted
- Lower minimum brightness for 4 inch display
- S63 change oil pressure request
- Preparation for differntial temperature (where available - el. differential)
08.02.2024
Version 0.44
0.44
- Fix: Read errors F-Series
- Fix (to be tested): E-Series sometimes flicker after ingition on/engine start
- Fix: S63 (Feedback welcome)
- Fix Exhaust flap graphics at main menu when switched by MFL
- Fix: N55 different diagnosis types
- Exhaust flap improvement (after engine start)
- TO TEST: Soundtuning ON/OFF (not working for B58)
25.01.2024
Version 0.42
0.42
- Fix M2 N55 Oil level
- Fix: Boot Last Page Custom
- Fix: ASD "Active Sound Design" Off
- Fix: some wrong calculations (hPa to bar)
- Fix: Gauges - if car has no boost show Airmass and Iat in middle gauges
- Fix: Issue with changing units - wrong calculation
- BETA: Add Limit function (Settings - Extra) only "show small icon" available at the moment
- BETA: Add S63 Engine
17.01.2024
Version 0.41 BETA1
0.41 Beta 1
- Fix: Freeze if can-bus connection has a problem
- Test: active regeneration of the DPF will change the color of the exhaust temperature value to red
- Test: show correct oillevel F-Series N55
- Fix: Auto-Detect display size for correct brightness control
13.01.2024
Version 0.40
0.40
- Fix: Freeze at custom page on some displays
04.01.2024
Version 0.39
0.39
- Fix external Oil temperature (bug since 0.38)
- Brightness control for 3.2 inch display darker
- Add N47 Alpina (D71N47)
Version 0.38
0.38
- Fix: Street-Mode activation wihtout engine running was not working correctly
- Fix: Fuel-Overview (including oil level - if available) - If MHD Can-Bus Ethanol sensor installed it will show the values here
- Fix: G-Series global can-bus
- Add Oil pressure color setup
- Ext. Oilpressure Sensor now showing values without engine running
- N57 disable wrong oil temperature from can-bus even in max values
- Auto detect Display 3.2 or 4 Inch (no need to manual select display size in options)
- Add option "Time for Bootlogo fading in"
30.10.2023
Version 0.35
0.35
- Extend error text length
- Fix exhaust flap (undefined switch after 2 minutes)
- Fix "Street Mode" set exhaustflap to "Auto" when activated instead of keeping the last status
- To be tested: Faster exhaust flap switch after engine start
- Fix Gauge-Sweep
- For testing: Add Option: Settings - Display - "Data Options" to activate/deactivate actual gear at temperature-page
- For testing: Add Option: Settings - Display - "Data Options" to activate/deactivate fuel-info page (temperature page left swipe / g-force page right swipe)
12.10.2023
Version 0.34 Fix swipe problems of 0.33
0.34
- faster update
- Fix 0.33 swipe problems
11.10.2023
Version 0.33 (Beta Version - feedback welcome)
0.33
- faster update
- Fix N62 Engine
- Fix E-Series black screen when car was closed for a short time
- Disable gearbox temperature if not exist
- Disable oilpressure if not exist
- Fix DPF Diff-Pressure Values
- keep own bootpicture after update
- more letters in plain text of error codes
07.09.2023
Version 0.31
0.31
- Add option for oil pressure (if ECU is equal to others without Oilpressure like MSD80)
- Add option for oil pressure relative or absolute
- Add Safe Mode (press 5 times in the left bottom corner to go back to keypad)
- Add Custom Page (first page - up to 8 values)
23.08.2023
Version 0.30
0.30
- Fix jumping values at some models
- Test: send data to AIM display
10.08.2023
Version 0.29
0.29
- Fix E-Series N55 ECU MEVD176K
- Fix E-Series Gauge-Sweep needle stuck
- Test: Fix E-Series Gearbox temperature
- Fix Exhaust Flap MFL
19.07.2023
Version 0.28
0.28
- Fix GUI
- Add Color setup for temperatures
- Add more N47 ECU types
- Fix Gearboxtemperature S65
- Fix N55 E-Series
- First try to fix jumping values on some cars (2017-2018)
- Add "stand-by" turn off display, still active in background
- Add errorcode plain text for lot of DMEs
- Fix E-Series Diesel
- Add Voltage to M47 pre-facelift
16.05.2023
Version 0.26
- Add N13 (MEVD1725) engine
- Add Oilpressure to MSD80 where oem sensor is installed (N53)
- Fix Gaugesweep (Please report if working or not)
- Add Street-Mode
- Start development "time measurement"
- Add Speed Offset
- Add N55 Alpina MEVD172
- Add some DME Errortexts
- Add B38
- Fix N55 E-Series
23.04.2023
Version 0.25
- Fix N57 Öltemperatur
- Fix G-Force maximum Werte wenn negaitv
- Street-Legal Version hinzugefügt (keine Auspuffklappensteuerung)
- Fix Getriebetemperatur (hatte bei einigen Motoren gefehlt)
- DME errorcode Texte MEVD176K hinzugefügt
- DME errorcode Texte MSV80 hinzugefügt
- DME errorcode Texte MSV70 hinzugefügt
- Fix Maximale Werte löschen
- MEVD17KW N55 hinzugefügt
- B47 hinzugefügt
19.04.2023
Version 0.23
Changelog:
Bugfix - Fehlende Werte nach dem starten wenn Auspuffklappe aktiv